144 MHz radio communication FM portable Transceiver VHF W/ 1900mAh Li-ion & Rapid Charger (BP-265/BC193/BC-123SA). This military rugged rig offers water resistance and superior protection against dust and dirt. Compact, rugged and with plenty of power, the Icom IC-V80 is ideal for basic, on-the-go ham operations.
Replace with the Icom IC-V86.
50mW loud audio
The Icom IC-V80 uses the BTL (bridge-tied load) amplifier that doubles the audio output. The 36mm large speaker delivers 750mW of loud and intelligible audio*. Great for noisy environments.
* Typical value using with internal speaker.
Powerful 5.5W of output power
The Icom IC-V80 offers a just-right mix of power and size. 5.5 watts of high power will work to get your message through. Get up to 19 hours* of operating time with the Li-ion battery pack (BP-265) or 13 hours with the Ni-MH (BP-264). All that power comes is an easy to hold and use size - not too big, not too small.
* Typical operation. 5:5:90 duty cycle with power save on.
IP54 and MIL-STD-810 rugged construction
The dust protection and water-resistance equivalent to IP54 provides reliable operation for practical outdoor operation. The IC-V80/E tested to and passed 11 categories of MIL-STD-810 environmental tests.
A total of 207 memory channels
The Icom IC-V80 has a total of 207 memory channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 5 characters for easy recognition.
The CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the subaudible tone that is used for repeater access.
Internal VOX function
The Icom IC-V80 has internal VOX (Voice Operated Transmit) function for convenient handsfree operation with a compatible optional headset and plug adapter cable. Also, the VOX gain and VOX delay time are adjustable.
- WX channel and weather alert function (USA version only)
- Program, memory, skip, priority and tone scans
- Power save function
- BNC type antenna connector
- Automatic repeater function (USA version only)
- 1750Hz tone for European repeater access (IC-V80E only)
- TOT (time out timer) setting
- Repeater lockout and busy channel lockout
- PC programmable with optional CS-V80
- Transceiver-to-transceiver cloning (Optional)
- Direct keypad frequency entry
- DTMF autodial memories
- Auto power off
- LCD backlight
- Wide/narrow channel spacing
Tx 144–148 MHz
Rx 136–174 MHz*
*Guaranteed range 144–148 MHz
Type of emissions F2D/F3E (FM)
No. of memory channels 207 (incl. 6 scan edges and 1 call)
Frequency stability ±2.5ppm (-20°C to +60°C) at 25° C
Operating temperature range –20°C to +60°C; –4°F to +140°F
Power supply requirement 7.2 V DC
Antenna impedance 50Ω (BNC)
58 × 112 × 30 mm; 2.28 × 4.41 × 1.18 in
Weight (approx.) 140g; 4.9oz (without battery pack)
360g; 12.7oz (with BP-264 and FA-B2E)
Output power (at 7.2 V DC) 5.5 W (High)
2.5 W (Mid)
0.5 W (Low)
Spurious emissions Less than –60 dB
Max. frequency deviation ±5.0 kHz/±2.5 kHz (wide/narrow)
External mic. connector 3-conductor 2.5 (d) mm (1/10″) / 2.2 kΩ
Sensitivity 0.14 µV (typ.; at 12dB SINAD)
Squelch sensitivity 0.1 µV (typ.; at threshold)
Selectivity 70dB/50dB typical (wide/narrow)
Intermodulation 70dB/65dB typical (wide/narrow)
Spurious and image rejection 75dB (typical)
Audio output power
(at 10% distortion)
Internal SP 750mW typ. (16Ω load)
External SP 450mW typ. (8Ω load)
External speaker connector 3-conductor 3.5 (d) mm (1/8″) / 8Ω
IC-V80 Icom, portable transceiver VHF
- Brand: Icom
- Product Code: ICOM
- Availability: 2-3 Days