The AT2K has a 6-position antenna selector. In addition, the Peak / Peak Hold measurement of the PM2000A has been incorporated into the AT2K. The direct power measurement is in two ranges, 300 and 3000 watts. The standing wave ratio measurements are displayed with this illuminated cross needle indicator. The SWR is read directly from the face of the meter where the front and back hands intersect.
AT2K combines dipoles, center feed doublets, vertical cables, end cables, delta loops, wind turbines, inverted Vees and many other types of antennas.
With a chassis in 11 ga. (.090 "thick), iridite treated aluminum, and a durable powder coated finish on the front panel and top cover, you can have a tuner that will beautify your amateur radio station for years to come.
Palstar AT2K tuners include:
- impedance range from 20 to 1500 ohms from 160 to 6 meters (assuming a resistive load)
- Low number of custom variable capacitors, 15pF to 400pF at 4.5 kV
- 5 kV 5 kV ceramic coil inductor with rev counter
- Silver plated inductor wheel shaft and contact wheel
|Features||Antenna Tuner Type: Manual
Antenna Tuner Location: Desktop
Mobile Whip Tuner: No
Tuner Maximum Power Rating: 2,000 watts
Frequency Range: 1.8-54 MHz
Tuner Inductor Type: Roller
Tuner Capacitors: 2
Tuner Bypass Switch: Yes
Tuner Control Type: External
Internal Dummy Load: No
Internal Balun Type: None
DC Power Required: Yes
Tuner Width: 14.500 in.
Tuner Height: 5.000 in.
Tuner Depth: 13.500 in.
Tuner Weight: 17.00 lbs.
AT2K Palstar, manual antenna tuner 2000 W
- Brand: Palstar
- Product Code: Palstar
- Availability: In Stock